|
| |
CENTER V2 INSTALLATION AND CONFIGURATION |
|
| |
Connecting to Center V2
To configure the GV-System in order to access the Center V2 remotely through a network connection,
follow these steps:
1.in the Main System, click the Network button,and select Connect to Center V2. This dialog box appears. |
 |
| |
| |
| |
2.Enter the IP address of the Center V2,the user ID and password created in Center V2.
See Creating a Subscriber's Account earlier in this chapter.
3.Click the Connect button.When the connection is established,Center V2 will start receiving videos or attachments from the subscriber.
Normal Mode Setup
To further define the communication conditions between the subscriber and Center V2,select Normal Mode on the Connect to Center V2 dialog box (Figure 9-12),and then click the Advance button for setup.The setup window includes these tabs:(1)General,(2)Camera,(3)Other and (4)I/O Device. |
 |
| Creating a Subscriber
1. Click the Add A Group button (No.1,Figure 9-2)to create a group.
2. Click the Add A Subscriber button(No.2,Figure 9-2).The Subscriber Address Book dialog box appears. |
 |
| 3.Enter a login ID and password(required).Those will be the ID and password for the subscriber to log in to the Center V2. See Figure 9-12.
4.Enter the subscriber's contact information in the rest of fields(optional).
If you wish to send e-mail selers to this subscriber,enter its e-mail address. For e-mail settings,refer to E-Mail Alerts,later in this chapter.
If you wish to send SMS alerts to this subscriber,enter its country code and mobile number.For SMS server settings,refer to SMS Alerts,later in this chapter.
5.Click the OK button to save the above settings.You will be prompted to this dialog box.
|
 |
| 6. The options in the dialog box are discussed below. You may accept the default settings here, and edit them later by clicking the Subscriber Settings button (No.6,Figure 9-2) on the toolbar.When you click the OK button, the subscriber account then is created. |
| Back to TOP |
|
|
