| |
HOW TO INSTALL & SETUP REMOTE VIEW PROGRAM |
|
| |
| Please install Remote Setup from the Setup CD |
 |
Running Setup program, you just need to follow the step by step.
Go Next until Finish. It should be done. |
 |
Run RemoteView software
Start -> Program -> Multicam -> RemoteView |
 |
| |
|
| |
|
| |
|
| How to Use? |
RemoteView design for Supervisor watching purpose.
Please Notice this. RemoteView only allow 1 user to access at time.
If you are using WinXPsp1 and cannot see any video picture, please go to our download page to download Patch
program.
On the Main System site, please make sure Enable TCP Server (for the RemoteView).
if you are using 56k Modem to direct connect, please make sure Enable Modem Server |
After running RemoteView software, you should see this picture.
Click Connect button, Select Internet TCP/IP
if you are using 56k modem to direct connect, please select Dial modem instead. Please make sure main dvr system has
modem also. |
 |
Running Setup program, you just need to follow the step by step.
Go Next until Finish. It should be done.
Please type your main system IP address.
And, your ID & password.
Click Login. That should be done |
 |
| Back to TOP |
