Home  //  > Support  //  > Installation and operation
DVR Mobile Surveillance SuperMeye-android

See V 1.0

User Manual

Table of Contents

1.Function introduction

2.Getting Start

3.Add/Edit/Delete device

4.Live View

5.Snapshot and Record

6.Local Settings

7.Query Remote Video

8. Help and support.

1. Function introduction

This app allows android mobile phone user to view and control live video streams from IP Cameras, NVR

and DVRs.

1. Stream Videos over WIFI or 3G

2. View up to 4 live video streams

3. Device management.

4. Snapshot and browse picture

5. Record and playback video

6. PTZ control

7. Support horizontal and vertical screen viewing

8. Audio and Talkback.

9. Query and play Remote Video

10. P2P and QR code scan

2. Getting Start

Connect your android device to the 3G or WIFI network. Run this app, and you will see main interface.(as the below pictures)

Panel button description

Button icon

Function description

Add a new device

Device List

Snapshot and Record files

PTZ:UP

PTZ: Down

PTZ: Right

PTZ: Left

Zoom In

Zoom Out

Focus Add

Focus Minus

Iris Add

Iris Minus

Snapshot

Start/Stop Record

Local Settings

User guide

Audio

Talkback

Query Remote Video

3. Add/Edit/Delete device

• Add Device

Tap, then you will have the two way below to add: two-dimensional code scanning and manually enter.(as the below picture)

(1) when you click “two-dimensional code scanning”, it will go to code scan. Please point the camera of

mobile phone directly to the code until it scan the code. When the code scanning is successful, you will

get the below picture.

Entry

Descriptions

Name

Any characters that you like to identify this device. Please be noted

that the name should not duplicate with existing device’s name.

Address

The P2P ID, Obtained by code scanning

Port

DVR’s mobile port, 6003 by default

User

DVR’s user name, Admin by default

Password

DVR’s password, no password by default

Channel Number

Select the channel number, when assign, the app will set the number automatically.

(2) When you click “manually enter”, you will see below picture.

And you just need input the information of device. Please refer to the below descriptions.

Entry

Descriptions

Name

Any characters that you like to identify this device. Please be noted

that the name should not duplicate with existing device’s name.

Address

Target’s IP address or URL, please be noted that if URL is used,

the “http://”prefix should not be included.

Port

DVR’s mobile port, 6003 by default

User

DVR’s user name, Admin by default

Password

DVR’s password, no password by default

Channel Number

Select the channel number, when assign, the app will set the number automatically.

Edit/Delete Device

To Edit/Delete a device, Tap open the Device list(as the below picture).

You can enter into editing mode by tapping the of a certain row and click button in the upper-right corner. Then you will go to the below window. You can modify device login information in this window. And at the bottom of this window, you can delete the device by click the red button

After revise, please tap in the upper right corner.

4. Live View

When finish adding device, it will show the below playing window.

To start a live video, tap the Device icon, then tap the channel you want.

Repeat above steps to connect to other channels of the device or another devices.

When some channel is selected, the channel circle icon’s color will turn into bright-yellow. Tap the bright-yellow icon, the channel video will stop and the channel circle icon color becomes gray.(as the below picture)

PTZ Control

Tap to open the PTZ Control panel. Then you can control the PTZ by the panel.

To hide the panel, you can either tap the button again or tap any places of the screen.

5 Snapshot and Record files

• Snapshot and Record Playback

You can snapshot the live video by and start/stop recording the live video by . These snapshot and recording files are saved in the android mobile device.

Tap to visit the Snapshots & Record files, you can playback or delete the files from the below window.

Tap , you will see the device list that have snapshot. Then tap any device, and you will see all the snapshot files of that device. You can delete the snapshot file by tapping “edit” in the upper right corner.

Tap , you will see the device list that have recording. Then tap any device, and you will see all the recording files of that device. You can delete the recording file by tapping “edit” in the upper right corner.

• Export Snapshot and Record Files

You can search “super meye” folder in the storage card of android mobile devices, because the software will create such folder automatically and save the snapshot and recording files in this folder. Then you can copy and export the snapshot and recording files that you want.

6•Local Settings

Tap to open the Settings view:

Video Views

One window display on the Live view

Four windows display on the Live view

Live Preference

Real-time mode: no buffering, which means there is minimum

delay of the video display and video fluency may be suffered;

Quality mode: buffering enabled, the video will be more fluent in

this mode;

Auto Play

Your last sessions will be recorded and opened automatically in

your next launch;

Default mode, the auto-session-recording is disabled;

7• Query Remote Video

Tap, and you will see the device list. Tap of any device, and you will go to the below window.

In this window, you could set the search criteria as time/channel number/records types to get the accurate result. After the criteria set, press on the upper right corner to begin search. Then the recording files that meet the criteria requirement will show as the below picture.

8• Help and support

(1) If you have problems of using this app, please click the panel button , then you will get below pictures:

If the aboves picture still can not help you deal with the problems. Please click on the above pictures and you will see the detailed users’ manual.

(2) If you have any feedbacks or encounter any problems, please feel free to contact us.

Technical support: This e-mail address is being protected from spambots. You need JavaScript enabled to view it .

Last Updated on Friday, 05 July 2013 14:19
 
Scroll Up